Fruit And Vegetables Washing Machine|Potato Washing Machine
The fruit cleaning equipment is a bubble spray cleaning machine, the material falls into the water, the material is stirred and washed by the water tumbling in the tank body, and the material is tumbling under the combined action of the bubble machine and the water, and the high pressure gas is used to generate the bubbling to make the material. In the state of tumbling, the dirt on the material is separated and falls into the sedimentation zone below the filter. The material is gradually moved to the conveyor belt under the push of water, and is continuously pushed forward with the mesh belt, and is lifted out of the inner tank. When the water is out of the water, the high-end is equipped with a sprinkler. After spray cleaning, the material is washed twice and enters the following process. The filter cleaning device is arranged to effectively separate the impurities on the material, and the water is discharged from the circulating water overflow port, and the sediment is discharged from the port and is isolated by the filter screen in the circulating water tank to keep the material clean.
Cleaning scope: corn, alfalfa, peanut, soybean, strawberry, peach, apple, blueberry, jujube, shiitake mushroom, enoki mushroom, oyster mushroom, mushroom, fungus, white fungus, asparagus, green pepper, cabbage, chives, leeks, rape,spinach, garlic, bean sprouts, mung bean sprouts,mustard greens, snow vegetables, kelp,kelp, sea cucumber,sea bream, wakame, asparagus, various fish and so on.
1. This equipment is made of SUS304 stainless steel. The equipment has beautiful appearance, good structural strength, stable transportation and safe operation of materials.
2. This machine is made of SUS304 plate bending. 5. The bracket is made of high-strength material, multi-position linear welding and structural fastness.
3. Leveling feet are made of Φ50 large diameter high strength stainless steel feet
4. Motor and reducer are easy to resist, easy to assemble and disassemble, and have large torque.
5. Both sides of the conveyor belt are designed for the wear-resistant strip to prevent material rubbing
6. The bearing housing adopts vertical bearing seat. This part is a common part, fast assembly and disassembly, long service life.
7. The feed end hopper is made for storage, and at the same time, it is lifted at a large angle to play a limited role.
8. The lifting section is connected to the tap water spray pipe for spray cleaning.
9. The raw materials can be thoroughly cleaned during the cleaning process, desalinated
E-Mail
Whats
TOP