Automatic Stick Noodles Making Machine Price

stick noodles machinestick noodles making machine
The complete sticks noodles machine consists of:
1.Flour pneumatic feeding system ( Optional part)
2.Flour mxing /dough mxier 
3.Dough sheet rolling  
4.Noodle slitting  
5.Noodle haning 
6.Noodle drying 
7.Noodle cutting 
The production process of making stick noodles: 
One, flour mixing system. It is the first working procedure noodle production, the purpose is to add right amount of water in flour and other accessories, agitate the protein in wheat flour water absorption expansion, with toughness, elasticity, viscosity. The device has a single shaft mixer machine, biaxial mixer machine. 
Two, dough rolling, cutting system. Curing machine, compound machine, rolling machine, cutting machine, rod supplying machine, hanging machine six part together complete noodle forming stage. And good curing after 10 minutes, stirring of grains to make fully absorbing water, puffing formed wet gluten and made into composite rolling machine, press dough sheet to 0.8-0.2 mm. Through cutting knife, according to the different specifications of wet noodles cut into 0.8 to 3 mm, rod supplying machine put 2400-2600 - mm long noodles by hanging machine up to parallel chain stores. 
Three, automatic shelves end tail cut tidy device consists of hanging, trim noodle ends, cut, control cabinet. Noodles hung on steel bar are lifted to starting point of drying room, using integrated circuit control. Synchronously hung on  hanger of mobile drying device, end cutting machine costume on the starting point in the process of drying, cut down the noodle end  for recycling use at any time, due to cut into a certain length in advance before entering drying process, greatly reduced cracker dough head. 
Four, drying system. Drying system consists of drying operation main drive, steel structure of the cooling fan, moisture removal fan, steam heating tube, sensor, the temperature and humidity detection control instrument, electrical control and so on, 
Five, putting-down production system. This system consists of the putting-down parts, finished product tidy machine, cutting machine, control cabinet and so on, after 4 to 5 hours to dry.
What should you figure out before you enquiry a stick noodles machine:
1. For capacity, how many pieces of the finished noodles do you want to process in one hour? How many working hours in one day?
2. Do you have factory now? If yes, what about the voltage and size?
And then we can suggest you suitable machine with best price. For more details, please contact us at Email: or Phone/WhatsApp: +8618537181190
Thank you for visiting our site! Please feel free to submit this form with any questions or comments. We will answer your message within 24 hours.

Get Price

Number Change

Our page uses cookies

We use cookies to personalize and enhance your browsing experience on our website. By clicking "Accept All", you agree to use cookies. You can read our Cookie Policy for more information.